Tektronix DPO4014B.

Offering up to 1 GHz bandwidth and 5 GS/s sample rate, the MSO/DPO4000B Mixed Signal Oscilloscope Series delivers the performance you need to see fast-changing signal details. With as many as 20 channels, you can analyze analog and digital signals with a single instrument (MSO models). Combine that with automated serial and parallel bus analysis, innovative Wave Inspector® controls, and automated power measurements, and the MSO/DPO4000B Series provides the feature-rich tools you need to simplify and speed debug of your complex design.

• 1 GHz, 500 MHz, 350 MHz, and 100 MHz bandwidth models
• 2 and 4 analog channel models
• Up to 5 GS/s sample rate on all channels
• Up to 20 mega-point record length on all channels
• >50,000 wfm/s maximum waveform capture rate
• Standard passive voltage probes with less than 4 pF capacitive loading and 500 MHz or 1 GHz analog bandwidth
• Suite of advanced triggers
• Wave Inspector® controls provide easy navigation and automated search of waveform data
• 41 automated measurements, and FFT analysis for simplified waveform analysis
• Optional serial triggering and analysis - automated serial triggering, decode, and search options for I²C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM
• TekVPI® probe interface supports active, differential, and current probes for automatic scaling and units
• Optional applications: Power analysis, limit and mask testing, HDTV and custom video analysis
• Two USB 2.0 host ports on the front panel and two on the rear panel for quick and easy data storage, printing, and connecting a USB keyboard
• USB 2.0 device port on rear panel for easy connection to a PC or direct printing to a PictBridge®-compatible printer
• Integrated 10/100/1000BASE-T Ethernet port for network connection and video out port to export the oscilloscope display to a monitor or projector
• 10.4 inch (264 mm) Bright XGA color display
• Small footprint and lightweight – Only 5.8 inches (147 mm) deep and 11 lb (5 kg)

DPO4014B characteristics:

• Input channels: 4
• Analog bandwidth: 100 MHz
• Sample rates
  • 1 channel: 2.5 GS/s
  • 2 channels: 2.5 GS/s
  • 4 channels: 2.5 GS/s
• Rise time: 3.5 ns
• Vertical system
  • Hardware bandwidth limits: 20 MHz
  • Input coupling: AC, DC
  • Imput impedance: 1 MΩ ±1%, 50 Ω ±1%
  • Vertical resolution: 8 bits (11 bits with Hi Res)
  • Maximum input voltage, 1 MΩ: 300 Vrms CAT II with peaks ≤ ±425 V
  • Maximum input voltage, 50 Ω: 5 Vrms with peaks ≤ ±20 V
• Horizontal system
  • Time base range: 1 ns to 1000 s
  • Time-base delay time range: 10 divisions to 5000 s
  • Channel-to-channel deskew range: ±125 ns
• Trigger system
  • Trigger modes: Auto, Normal, and Single
  • Trigger coupling: DC, AC, HF reject (attenuates >50 kHz), LF reject (attenuates <50 kHz), noise reject (reduces sensitivity)
  • Trigger holdoff range: 20 ns to 8 s
• Trigger level ranges
  • Any input channel: ±8 divisions from center of screen;  ±8 divisions from 0 V when vertical LF reject trigger coupling is selected
  • Aux Input (external trigger): ±8 V
  • Line: The line trigger level is fixed at about 50% of the line voltage
• Trigger types: Edge, Sequence (B-Trigger), Pulse Width, Runt, Logic, Setup and Hold, Rise/Fall time, Video, Token packet trigger, Data packet trigger, Handshake packet trigger, Special packet trigger, Token packet trigger, Error trigger, 100BASE-TX, MAC Addresses, MAC Q-Tag Control Information, MAC Length/Type, IP Header, TCP Header, TCP/IPv4/MAC Client Data
• Optional trigger types: Extended Video, 12C, SPI, RS-232/422/485/UART, USB - low speed, USB - full speed, Ethernet, CAN, LIN, FlexRay, MIL-STD-1553, I²S/LJ/RJ/TDM
• Acquisition modes: Sample, Peak Detect, Averaging, Envelope, Hi Res, Roll
• Waveform measurements: Cursors, 29 automatic measurements (time domain), statistics measurements, reference levels, gating, waveform histogram
• Waveform math: Arithmetic, integrate, differentiate, FFT, advanced algebraic expressions
• Options: Power measurements, limit/mask testing
• Display
  • Display Type: 10.4 inch (264 mm) liquid-crystal TFT color display
  • Display Resolution: 1,024 horizontal × 768 vertical pixels (XGA)
  • Interpolation: Sin(x)/x
  • Waveform Styles: Vectors, Dots, Variable Persistence, Infinite Persistence
  • Graticules: Full, Grid, Cross Hair, Frame, IRE, and mV
  • Format: YT and simultaneous XY/YT
  • Maximum Waveform Capture Rate: >50,000 wfm/s
• Input/output ports
  • USB 2.0 High-speed Host Port: Supports USB mass storage devices, printers and keyboard. Two ports on front and two ports on rear of instrument
  • USB 2.0 Device Port: Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488), and direct printing to all PictBridge-compatible printers
  • LAN Port: RJ-45 connector, supports 10/100/1000 Mb/s
  • Auxiliary Input: Front-panel BNC connector. Input Impedance 1 MΩ. Max input 300 Vrms CAT II with peaks ≤ ±425 V
  • Probe Compensator Output: Front-panel pins. Amplitude: 2.5 V. Frequency: 1 kHz
  • Auxiliary Out: Rear-panel BNC connector. Vout (Hi): ≥2.5 V open circuit, ≥1.0 V 50 Ω to ground. Vout (Lo): ≤0.7 V into a load of ≤4 mA; ≤0.25 V 50 Ω to ground. Output can be configured to provide a pulse out signal when the oscilloscope triggers, the internal oscilloscope reference clock out, or an event out for limit/mask testing
  • External Reference Input: Time-base system can phase lock to an external 10 MHz reference (10 MHz ±1%)
  • Kensington Lock: Rear-panel security slot connects to standard Kensington lock
  • VESA Mount: Standard (MIS-D 100) 100 mm VESA mounting points on rear of instrument
• Lan eXtensions for Instrumentation (LXI): LXI Class C, V1.3