Used Keysight Technologies (Agilent HP) E9301H for sale by DARUIBO CO.LTD | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Sensors Power Sensors Keysight Technologies (Agilent HP) E9301H

Keysight Technologies (Agilent HP) E9301H

Send Request
  • Ask for price

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Keysight Technologies (Agilent HP) E9301H

Categories: Sensors, Power Sensors

Manufacturer: Keysight Technologies (Agilent HP)

Model: E9301H

Condition: Used

HP E9301H E-Series Average Power Sensor

Condition: USED

Product specifications of Keysight Technologies (Agilent HP) E9301H (From Used-Line T&M Specifications)

The E9301H power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -50 to +30 dBm (80 dB dynamic range).

Used with the Agilent E4418 (single-channel) and E4419 (dual-channel) EPM series power meters, the Agilent Technologies E-series E9300 power sensors can measure the average power of RF and microwave signals, regardless of the modulation format, over a wide 80 dB dynamic range (sensor dependent). E9300 power sensors are bandwidth independent, so you do not have to worry about matching sensor bandwidth to the modulation format of the signal under test. You can standardize on one power sensor for all of your average power measurement applications, eliminating the need to change sensors during measurement tasks and minimizing the cost of equipment.

The Agilent E-series E9300 power sensors employ a patented, diode-attenuator-diode topology that ensures the accuracy and repeatability of measurements across the full -60 to +20 dBm dynamic range. This technique has the advantage of always using diodes in their square-law region, where the output current and voltages respond accurately to different modulation formats. Each E9300 sensor has two measurements paths, one for high power between -10 and +20 dBm and one for lower power between -60 and -10 dBm. The sensor switches between power ranges quickly and automatically, thus providing the benefit of two power sensors in one. With a high maximum power specification of +25 dBm and peak power of +33 dBm (<10 microseconds duration), the E9300 sensors can handle the large crest factors typical of the newest signal modulation formats.
The E9300 power sensors have exceptionally flat calibration factors across their entire frequency range, which allows you to select an appropriate calibration factor for your measurement, even when the test signals used are widely spaced in frequency.
The E-series E9300 power sensors provide exceptionally low standing-wave-ratio (SWR). For example, SWR is 1.15 from 10 MHz to 2 GHz over 25 ± 100C. Low SWR means that mismatch uncertainty has been minimized and measurement accuracy improved.
The design of the E9300 power sensors results in low harmonic generation when compared to other wide dynamic range sensors in use today. This design minimizes stray-signal reflections and helps ensure the accuracy of high power measurements.

  • Measure the average power of all modulation formats
  • Wide dynamic range: -50 dBm to +30 dBm
  • Frequency coverage for Wireless Comms formats: 10 MHz to 6 GHz
  • Low SWR for reducing mismatch uncertainty: 10 MHz to 6 GHz: 1.15
  • Calibration factors, linearity and temperature compensation data stored in EEPROM
  • Compatible with EPM, EPM-P and P-series power meters
  • Connector Type-N (m)

View Similar Listings
Hide Similar Listings

About DARUIBO CO.LTD

Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later