GW Instek GSP-830 3GHz Spectrum Analyzer
Featuring high performance, uncompromised design, and remote monitoring software, the GSP-830 3GHz Spectrum Analyzer is the latest evolution from GW Instek. The GSP-830 is one of the most advanced Spectrum Analyzers GWInstek has produced to date. The GSP-830 has an exceptional noise floor of -152dBm/Hz; combined with the optional GAP-802 preamplifier, the noise floor can reach a remarkable -172dBm/Hz. With a low noise floor, the GSP-830 is more than capable of finding limits; Trace Detection, combined with an easy-to-use interface, makes the GSP-830 an ideal solution for spectrum analysis. Using the Auto Sequence mode, advanced users can define their own macros in 10 Sequence sets. Repeat or Single run mode can be used to streamline repetitive tasks. PC connection is effortless and versatile supporting USB host/device, RS232C, VGA and GPIB (optional) for remote monitoring, control and analysis.
- Low Noise Floor(-117dBm@1GHz, 3kHz RBW)
- Sequence Programming Functions
- ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
- 10 Markers with Delta Marker, Peak Functions
- AC/DC/Battery(Option) three modes of power supply
- USB/RS-232C/GPIB(Option) Interface
- 6.4in TFT Color LCD, Resolution: 640x480
- Optional Tracking Generator
- Optional Preamplifier
Available Options
Opt.01: Tracking Generator
- Frequency Range: 9kHz to 3GHz
- Amplitude Range: -50dBm to 0dBm
- Amplitude Accuracy: 1dB@100MHz, 0dBm
- Amplitude Flatness: 1dB@0dBm
- Harmonics: <-30dBc typical
- Reverse Power: +30dBm
- Impedance: 50Ω nominal
- TG output VSWR: <2:1
Opt.02: Battery pack, 10.8V Li-ion, qty 2
Opt.03: High Stability; ±1ppm/yr, 0 to 50°C
Opt.04: 300Hz RBW; 3dB bandwidth, 20% accuracy
Opt.05: 9kHz & 120kHz RBW; 6dB bandwidth, 15% accuracy
Opt.06: 10kHz & 100kHz RBW; 6dB bandwidth, 15% accuracy
Opt.07: AM/FM Demodulator; 10kHz & 100kHz RBW
- Output: internal speaker, 3.5mm stereo jack wired for mono operation
- RBW selections: 10kHz and 100kHz, 3dB bandwidth
- RBW accuracy: 15%
Opt.08: GPIB Interface
GSC-001: Soft Carrying Case
GKT-001: General Kit
- ADP-002: adaptor, SMA to Type-N, qty 2
- ATN-100: 10dB attenuator, Type-N to Type-N
- GTL-303: RF cable assembly (SMA,RD316,600mm), qty 2
- GSC-002: Kit box
GKT-002 CATV Kit:
- ADP-001: adaptor, BNC TO Type-N, qty 2
- ADP-101: adaptor, BNC, 75Ω BNC, 50Ω, qty 2
- GTL-304: RF cable assembly (RG223, Type-N to Type-N, 300mm), qty 2
- GSC-003: Kit box
- GKT-003: RLB Kit set
- GAK-001: termination 50Ω, Type-N
- GAK-002: Cap with chain, Type-N
- GTL-302: RF cable assembly (RG223, Type-N, 300mm), qty 2
- GSC-004: Kit box
GKT-003 RLB Kit:
- GAK-001: termination 50Ω, Type-N
- GAK-002: Cap with chain
- GTL-302: RF cable assembly; RG223, Type-N, 300mm, qty 2
- GSC-004: Kit box
GTL-401: DC power cord with DC Jack and lighter plug, Current 5A
GAP-801: Pre-amplifier; 10dB (typical), 9kHz to 6GHz