National Instruments PXI-6052E Multifunction DAQ
The National Instruments PXI-6052E (Part Number: 777962-01, 186408E-01) is a 16-Channel, 16-Bit Resolution Multifunction DAQ, which is a member of the full-featured E Series. This single-slot PXI module features two Analog Outputs, Analog/Digital Triggering, eight digital I/O lines, 15 analog input signal ranges, and two 24-bit counters/timers. The NI PXI-6052E offers real-time performance with LabVIEW, and is fully compatible with other software packages/application development environments (ADEs) such as VI Logger, Measurement Studio, and Visual Basic, C#, and C/C++. This Multifunction DAQ can be configured and programmed with the NI-DAQ 7 driver software. To utilize the NI PXI-6052E, the user needs NI-DAQ, a computer, the DAQ device, and either LabVIEW or Measurement Studio (optional).
The National Instruments PXI-6052E offers 16 single-ended or 8 differential channels (software selectable per channel) and 333 kS per second maximum sampling rate. While operating with 20 V range selected, this model offers ±10 V bipolar input range. However, at 100 mV (the lowest software selectable range) the PXI-6052E provides ±50 mV bipolar input range and 0 to 100 mV unipolar input range. As far as its transferring characteristics are concerned, this model offers ±1.5 (typical) and ±3 (maximum) LSB. This DAQ also comes equipped with one Frequency Scaler. The DC coupled device has 6 trigger lines with 1 star trigger, and is equipped with 3 DMA channels.
The resolution of its counter/timers and frequency scalar is 24 bits and 4 bits respectively; they are 5 VTTL/CMOS compatible. The recommended warm-up time for this Multifunction DAQ is 15 minutes. The calibration interval is one year. The NI PXI-6052E comes equipped with a male SCSI-II type, 68-pin male SCSI-II I/O connector. This model also supports external input for analog or digital trigger (PFI 0/AI START TRIG) at 10 kΩ, with DC coupling. The device weighs 7.2 oz., and has the dimensions: 6.3 x 3.9 in. It has a recommended operating temperature of 0 to 55 °C, and a storage temperature of –20 to 70 °C.
The PXI-6052E is no longer available from National Instruments, but the Multifunction DAQ Device will remain available in perpetuity for purchase and repairs with Apex Waves!
| Model | PXI-6052E |
|---|
| Manufacturer | National Instruments |
| Part Number | 777962-01, 186408E-01 |
| Series | E Series |
| Type | Multifunction DAQ |
| Analog Input Channels | 16 Single-Ended / 8 Differential |
| Input Resolution | 16 Bits |
| I/O Connector | 68-Pin Male SCSI-II Connector Type |
| Bus Interface | Master, Slave |
| Input Coupling | DC |
| Operating Temp Range | 0 to 55 °C |
| Storage Temp Range | –20 to 70 °C |
| Dimensions | 6.3 in. × 3.9 in. (16 cm × 10 cm) |
| Weight | 7.2 oz (206 g) |
| Calibration Interval | 1 Year |
| Warranty | Three Year Warranty |
| PXI-6052E Manual | User Manual and Maintenance Manual Available for Download |
| Price | Request a Quote Today for Pricing Information |
Associated part numbers for PXI-6052E:
183995D-06, 183995-06, 183995H-06, 183995J-06L, 183995-06L, 186408-01, 186408B-01, 186408C-02, 186408-02, 186408D-01, 186408D-02, 777962-01, 186408E-01, 186408F-01, 186408G-01, 186408H-01, 186408H-02, 186408J-01, 186408J-02, 186408K-01, 186408K-02, 186408L-01, 186408L-02, 186408M-01, 186408N-01L, 186408-01L, 777797-01, 779586-01
UPS, FedEX and DHL – Free Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
All of our products are covered by our Apex Waves Warranty.
✓ 3 Year Warranty - New Surplus Parts
✓ 2 Year Warranty - Refurb / Fully Tested Parts
No hassle return policy.
Dedicated customer service team.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
PCI-6052E, PXI-6O52E, PXI-6052W, PXI-6052S, PXI-6052F