SiteMaster 25 MHz - 20 GHz
Unit with options:
11NF = Replaces Standard K (f) Test Port Connector with N (f)
005 = RF Power Monitor (requires external detector)
The Anritsu 820D is a SiteMaster and is the most accurate, reliable and convenient microwave transmission line and antenna analyzers available for installation, verification, troubleshooting, and repair of microwave communication systems.
The standard Broadband Site Master spans 25 MHz to 20 GHz in a single coaxial connection. The start frequency can optionally extend to 2 MHz for handheld frequency coverage from 2 MHz to 20 GHz.
With this extended frequency range, the Broadband SiteMaster offers a unique capability to test a wide range of cables
and antennas in the field where access to AC power is limited or non-existent. As an alternative, option 2 is also bundled with the CW Source of option 22 for 2-port measurements.
Frequency range: 25 MHz to 20 GHz, optional to 2 MHz
Frequency resolution: 10 kHz (100 kHz for distance-to-fault)
Output power (from RF out port): < dBm
Immunity to interfering signals: on-channel +13 dBm, on-frequency -10 dBm
Measurement speed (return loss, SWR, DTF):
<= 2="" s="" for="" 517="" data="" points="" (cw="" on),="" <="" 4="" s="" (cw="">=>
Number of data points: 130, 259, 517
Return loss: 0 to 60 dB resolution:0.01 dB
Test port connector: K (f) or N (f) (option11NF)
VSWR: 1.00 to 65.53 resolution 0.01
Coax Waveguide (1-port) insertion loss: 0 to 30 dB resolution 0.01 dB
Cable and antenna analyzer
Display: TFT color 640 x 480
Low frequency extension to 2 MHz (optional)
Power monitor (optional)
2-port cable loss (optional)
GPS receiver (optional)
CW source mode interface (optional)
Dimension: 25.5 x 17.8 x 6.1 cm
Weight: <.28 kg (< lbs)
€ 11,900 $14,280 (US)