RF Microwave Signal Generator 100kHz-40GHz,
Options:
B140 = RF Path 100kHz - 40GHz w/ mechan. step attenuator
The R&S SMB100A is a compact, versatile RF and microwave signal generator with
a frequency range up to 40 GHz provides outstanding spectral purity and high output power.
In addition, it features easy operation, comprehensive functionality and low cost of ownership.
Frequency range from 9 kHz to 1.1/2.2/3.2/6 GHz or from 100 kHz to 12.75/20/40 GHz (This unit has 40 GHz)
Frequency extension to 110 GHz in combination with R&S SMZ frequency multiplier
All important analog modulations with AM, FM/φM and pulse modulation supported
Support of R&S NRP-Zxx power sensors
Reverse power protection as standard in the models up to 6 GHz
Intuitive user interface with graphical display of signal flow
Remote control via LAN, USB and GPIB
Very low SSB phase noise (typ.): –128 dBc at 1 GHz and –108 dBc at 10 GHz carrier frequency (20 kHz carrier offset, 1 Hz bandwidth)
DDS-based synthesizer concept
High output power (typ.): Up to +27 dBm
Low level range: Down to –120 dBm (for instruments equipped with step attenuator, this unit has an electronic step attenuator standard)
High harmonics suppression: < –30="" dbc="" even="" at="" high="" output="">
Optional stereo/RDS coder
Automatic synchronization of measurement results with R&S UPV or R&S UPP audio analyzer
Internal LF generator delivering sinusoidal signals at fixed or swept LF frequencies
Optional pulse modulator (typ.) > 90 dB ON/OFF ratio and rise/fall time
(typ.) <5 ns
Optional pulse generator with minimum pulse width 10 ns
Optional flexible generation of pulse trains for simulating complex pulse scenarios
Compact size with only two height units, 3/4 19" width and low weight
Frequency range: 100 kHz to 40 GHz
Max. output power 50 MHz < f=""><= 40="" ghz:="" +="" 13="" dbm="" (mit="" smb32="">=>
Min. specified output power: -120 dBm
Harmonics: standard; level <= 8="" dbm,="" f=""> 1MHz < 30 dBc
€ 33,000 $40,260 (US)
=>