Quadtech 7600 PLUS

Price : Call
  •  Equipment Location : USA
Description:
The 7600 Plus LCR Meter performs precision impedance measurements over a frequency range of 10 Hz to 2 MHz. The LCR Meter can measure 14 different impedance parameters with 0.05% accuracy, meeting todays requirements for component and material testing. The ease of use and user-friendly menu programming makes the 7600 Plus ideal for applications in product development, incoming inspections, or production line testing.Swept Measurements: Fast and accurate swept parameter measurements, graphical or tabular, for verification of component and material response to changes in ac test frequency, ac test voltage or ac test current, without the need for complex programming or an external controllerProgram and Data Storage: Test setups can be stored and recalled either internal memory or from the USB memory stick. Measured data can be stored on a memory stick and then transferred to PC for data reduction and analysis. Load Correction: Substantially improves instrument accuracy by performing measurements on a known standard and applying the correction to subsequent measurements. Ideal for repetitive testing of identical devices at like test conditions.Automatic Calibration Procedure: The 7600 can be calibrated without returning the unit to the factory using the NIST traceable QuadTech Calibration Kit, reducing down time and calibration costs.Easy to Use: Large LCD graphics display and user friendly menu driven interface allows the 7600 to be put

Refurbished

PRODUCT SPECS

(From Used-Line T&M Specifications )
  QuadTech 7600 Plus Specs (64.6 KB)
Test Freq. Range Low  10 Hz 
Test Freq. Range High  2 MHz 
Resistance Range Low  100 nOhm 
Resistance Range High  100 MOhm 
Capacitance Range Low  0.01 fF  
Capacitance Range High  9.999999 F  
Measurements  Z, L, C, Q, D, Phase, R, X, G, B, Y, Cs, Cp  
Status -
Launch Date Jun-2008

Fast and accurate swept parameter measurements, graphical or tabular, for verification of component and material response to changes in ac test frequency, ac test voltage or ac test current, without the need for complex programming or an external controller.

Test setups can be stored on and recalled from either internal memory or the USB memory stick. Measured data can be stored on a memory stick and then transferred to PC for data reduction and analysis.

Load correction substantially improves instrument accuracy by performing measurements on a known standard and applying the correction to subsequent measurements. Ideal for repetitive testing of identical devices at like test conditions.

The 7000 can be calibrated without returning the unit to the factory using the NIST traceable QuadTech Calibration Kit, reducing down time and calibration costs.

Large LCD graphics display and user friendly menu driven interface allows the 7000 to be put on line quickly, providing useful measurements by operators with little to no training.

  • Measures 14 Impedance Parameters (2 simultaneously)
  • 0.05% Basic Measurement Accuracy
  • Programmable Frequencies from 10Hz to 2MHz
  • AC Test Voltage Programmable from 20mV to 5V
  • DC Bias Voltage, 2V Internal or 0 to 200V External
  • Fast Measurement Speeds up to 120/Second
  • Automatic Open/Short Zeroing Eliminates Connection Errors
  • High Resolution LCD with 7 Digit Display
  • 14 Hi/Lo Sorting Bins for Pass/Fail Testing
  • RS-232, USB, Printer, IEEE-488 oprtional and PLC Interfaces all Standard
  • Results Displayed as Deviation or %Deviation from a Nominal Value
  • Internal Storage and Recall of Test Setups
  • Constant Voltage Maintained to the Device Under Test
  • Ability to Automatically Perform 6 Unique Tests in Sequence
  • Keypad Lockout Prevents Changes to the Test Setup
  • On site calibration with NIST Traceable Cal Kit
  • Programmable Average and Delay Times

CONTACT THE SELLER (RFQ)


To:  Test Equipment Connection Corp.
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 2000



Test Equipment Connection Corp.


1447
Visitors viewed Test Equipment Connection Corp. ads in the last 30 Days.


The dealer's latest update: 12 hours ago


30 Skyline drive Lake Mary 32746 FL USA  
More about this seller »


Sales Conditions:

Trade terms only with approved credit. We accept wire transfer and PayPal. Credit cards only from USA customers please.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Market place)

Similar Listings: