Tektronix 1103

Price : $ 695
  •  Equipment Location : USA
Tektronix 1103 Probe Power Supply

Condition: Refurbished


(From Used-Line T&M Specifications )
Status Discontinued
See also 1101A, 1102

The Tektronix 1103 TEKPROBE Power Supply provides external power to accessories and probes when the oscilloscope or similar instrument does not have the capability to do so.

The 1103 can operate at either 115 VAC or 230 VAC nominal voltage. Optional power cords are available to provide compatibility with different power source connections. The power supply has overload protection. It has a power switch on the rear panel and a power indicator on the front panel.

The 1103 allows probes that need TEKPROBE interface power to be used with any oscilloscope or digitizer that does not provide TEKPROBE power. The 1103 has connections and offset controls for two probe channels. Each channel has a TEKPROBE connectorr (that combines power output and signal input), a BNC signal output connector, an offset enable switch (with LED). and fine and coarse controls. The offset controls enable the user to set an offset voltage for probes such as the Tektronix P6701, P6702, P6703 optical to electrical converters, and for active probes such as the Tektronix P6203, P6204, P6231, and P6501 Active Probes (when used with appropriate power cord). The 1103 provides +5 VDC, -5 VDC, +15 VDC, and -15 VDC at the probe connector.

  • Output voltage: +15 VDC, -15 VDC, +5 VDC, -5 VDC, accuracy ±2%
  • Output current: 300 mA 
  • Line voltage: Low range 87 VAC to 128 VAC, high range 174 VAC to 250 VAC
  • Line frequency: 48 to 440 Hz
  • Power consumption: 35 W
  • Line fuse:
    • Low range (115 VAC): 250 V, 0.4 A T/SB
    • High range (230 VAC): 250 V, 0.20 A T/SB
  • Output configuration: TEKPROBE connector
    • Pin 1: no connection 
    • Pin 2: no connection 
    • Pin 3: +5 VDC
    • Pin 4: +15 VDC
    • Pin 5: Offset 1 V
    • Pin 6: -5 VDC
    • Pin 7: -15 VDC


To:  Test Equipment Sales
All fields are required
 Remember me
 Send me a copy.
News, sales, & auction announcements
About the Seller
since 1999

Test Equipment Sales

Visitors viewed Test Equipment Sales ads in the last 30 Days.

The dealer's latest update: over 30 days

8 Sparhawk Drive Londonderry 03053 NH USA  
More about this seller »

Sales Conditions:

At Test Equipment Sales, we accept several forms of payment for your purchase. Among them, MasterCard, Visa, Discover, electronic transfer, company and *personal checks,money orders and certified checks. Open accounts are available upon credit review. Personal checks require bank clearance before products may be shipped. 5 day right of refusal and a 90 day warranty on all pre-owned equipment. NIST traceable calibration available.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Manuals) (Market place)

Similar Listings: