High Frequency Current Probe/Current Transformer 200MHz, 36A.
The Tektronix CT1 and CT2 Current Probes are designed for permanent or semi-permanent in-circuit installation. Each probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole through which a current carrying conductor is passed during circuit assembly.
The P6041 Probe Cable provides the connection between the CT1 and CT2 Current Transformers and a BNC oscilloscope input. A 50 Ω termination is required to terminate the cable when connected to a high-impedance (1 MΩ) oscilloscope input. One probe cable can be used to monitor several current transformers that have been wired into a circuit.
High bandwidth
Ultra-low inductance
Very small form factor
Characterize current waveforms
Very low loading of circuit under test
Fits into dense, closely-spaced circuit designs
CT2:
Bandwidth: 1.2 kHz to 200 MHz
Rise time: 500 ps
Sensitivity (into 50 ohms): 1 mV/mA
Accuracy: +/- 3 %
Magnetizing inductance: 7 µH
Leakage inductance: 1 nH
Insertion impedance: 10 MHz: 0.1 ohm, 100 MHz: 0.5 ohm
Max. bare wire size: #16 wire 1.32 mm (0.052in.)
Max. bare wire voltage:
RMS: 175 V RMS CAT I
Peak: 1000 V
DC: 175 V
Max. Peak pulse current: 36 A
Max. continuous current (RMS) 2.5 A
€ 799 (net) $959 (US)