Agilent HP KT-83496B/100/200/300_ER

The 83496B Clock Recovery Module with Phase Noise Analysis provides increased eye-mask and jitter measurement accuracy with breakthrough performance in clock recovery circuitry. It provides ideal performance for waveform analysis with the 86100C Digital Communications Analyzer and can derive a clock from signals with rates as low as 50 Mb/s-14.2 GB/s (with 6100C DCA-J Firmware Revision A.08.10 or later), and any rate inbetween. At under 300 femtoseconds rms, the residual jitter of the output clock is virtually negligible, allowing accurate measurements of very low levels of signal jitter. Jitter spectrum and phase noise analysis on clock and data signals is available through a downloadable external application.

• Inputs: single-ended or differential, 3.5 mm (m) connectors
• Outputs: single-ended or differential, 3.5 mm (m) connectors
• Minimum electrical input level: 75 mVpp
• Continuous unbanded tuning from 50 Mb/s up to 14.2 Gb/s
  • Golden PLL operation (option 300) with a tunable loop bandwidth from 15 KHz to 10 MHz
  • Ultra low residual jitter: < 300 fs rms (characteristic at 10 Gb/s)
  • High gain for tracking spread-spectrum signals
  • Phase noise analysis of clock or data signals